Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL GTX™ Resin NX0031 - Americas - (PPE+PA*) - Saudi Basic Industries Corporation (SABIC)

Check here, which other Noryl GTX datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 기타 특성 - Processing Recommendation Injection Molding - 도표

Any use of this information falls under the rules of our disclaimer.

제품 설명서

NORYL GTX™ NX0031 resin is a non-reinforced alloy of PPE/PA. This conductive, injection moldable grade exhibits high heat resistance, excellent chemical resistance, and high impact resistance. NORYL NX0031 resin was designed for electrostatic painting and powder coating without the need for a conductive primer. This material can also be solvent painted and is an excellent for candidate for exterior, painted applications such as trim and fairings for outdoor vehicles, motorcycle, heavy truck, bus, personal watercraft, and marine. It is available only in black.

UL Yellow Card Link E121562-533883

Processing/Physical Characteristics	값	단위	시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR	8	cm³/10min	ISO 1133
온도	280	°C	-
하중	5	kg	-
용융 열전도율	0.22	W/(m K)	-
용융 비열용량	2200	J/(kg K)	-
이형온도	130	°C	-
ASTM 데이터
용융 흐름성, MFI	8	g/10min	ASTM D 1238
온도	280	°C	-
하중	5	kg	-

기계적 특성	값	단위	시험규격
ISO 데이터
인장탄성률	2000	MPa	ISO 527
항복강도	50	MPa	ISO 527
항복변형률	4	%	ISO 527
파단시 강도	48	MPa	ISO 527
파단시 신율	30	%	ISO 527
굴곡 계수	1900	MPa	ISO 178
챠피 노치드 충격 강도, +23°C	18	kJ/m²	ISO 179/1eA
챠피 노치드 충격 강도, -30°C	10	kJ/m²	ISO 179/1eA
아이조드 노치 충격 강도, +23°C, 4mm	20	kJ/m²	ISO 180/1A
아이조드 노치 충격 강도, -30°C, 4mm	10	kJ/m²	ISO 180/1A
ASTM 데이터
인장탄성률	2250	MPa	ASTM D 638
항복강도	52	MPa	ASTM D 638
파단시 강도	48	MPa	ASTM D 638
항복변형률	5	%	ASTM D 638
파단시 신율	34	%	ASTM D 638
굴곡 계수	2100	MPa	ASTM D 790
아이조드 충격은 노치, 1/8 in	224	J/m	ASTM D 256
아이조드 충격은 노치, Low-Temperature	117	J/m	ASTM D 256
온도	-30	°C	-

열적 특성	값	단위	시험규격
ISO 데이터
비카트 연화 온도, B	175	°C	ISO 306
비카트 연화 온도, 120°C/h 50N	180	°C	ISO 306
선형 열팽창 계수, 평행	100	E-6/K	ISO 11359-1/-2
선형 열팽창 계수, 수직	90	E-6/K	ISO 11359-1/-2
1.5mm 평균두께에서의 난연성	HB	class	IEC 60695-11-10
테스트 두께	1.5	mm	-
ASTM 데이터
DTUL @ 66 psi	176	°C	ASTM D 648
DTUL @ 264 psi	136	°C	ASTM D 648
비카트 연화 온도	175	°C	ASTM D 1525

기타 특성	값	단위	시험규격
물에서의 흡수성	4.2	%	ISO 62와 유사
조건에서의 흡습성	1.2	%	ISO 62와 유사
밀도	1090	kg/m³	ISO 1183
밀도	1090	kg/m³	ASTM D 792

Processing Recommendation Injection Molding	값	단위	시험규격
Pre-drying - Temperature	95 - 105	°C	-
Pre-drying - Time	3 - 4	h	-
Processing humidity	≤0.07	%	-
용융수지온도	270 - 295	°C	-
성형온도	65 - 95	°C	-
Zone 1	255 - 295	°C	-
Zone 2	260 - 295	°C	-
Zone 3	265 - 295	°C	-
Screw speed	20 - 100	rpm	-
Back pressure	0.3 - 1.4	MPa	-

도표

특징

생산 공정

사출 성형

지역별 검색

쨘횕쩐횈쨍횧쨍짰횆짬

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.